Why Hire a Plumber

Plumbers install and repair pipes and fixtures associated with water, sewage, and drainage channels in residential and commercial properties. They also interpret blueprints and building codes to plan plumbing installations.Plumber

Plumbers often collaborate with other professionals, such as construction teams and architects, to ensure that their work integrates seamlessly into building projects. They use their coordination skills to complete plumbing jobs quickly and accurately. Contact Plumber Woodland Hills for professional help.

A plumber installs new faucets in homes and businesses. They may also repair or replace old or damaged faucets, including those that have been leaking for a long time or those that are difficult to turn on and off. Plumbers have a variety of tools to help them perform their job, such as wrenches and screwdrivers, and may use caulk or plumber’s putty to seal joints. They also have access to water supply lines, shut-off valves and other plumbing hardware that homeowners might not have on hand.

The first step in installing a new faucet is preparing the area for work. This can involve removing items and storage from underneath the sink, as well as clearing away any loose dirt or debris that may have accumulated in the space. It’s also a good idea to place a bucket or pan under the sink to catch any dripping or spilling water that could occur while you’re working on the project.

Once the workspace is clean, it’s time to begin assembling your materials and tools. Most new faucets come with detailed instructions for installation, so you’ll want to follow them closely. You’ll also need a bucket or pan to hold any spilled water as you work and a pair of pliers to remove the existing faucet mounting nuts. You might also need a basin wrench, which has jaws that open up like a clamp and can reach into tight spaces behind the sink.

Once you’ve removed the old faucet, clean the mounting hole in the sink or countertop and apply a waterproof sealant to the surface, if necessary. You can find this at most home improvement stores in the hardware section. Once the sealant dries, you can start assembling your new faucet. Before you connect the water lines, it’s important to make sure they are the right size for the faucet connectors and the shut-off valves. To avoid having to make repeated trips to the hardware store, bring one of your old water lines with you when you go shopping so that you can match up the parts.

Faucet Repair

Over time it’s almost inevitable that faucet parts will wear down or break. This can be caused by mineral deposits, corrosion, aging, or even just normal use. If you find yourself with a leaky faucet, it’s important to call a plumber as soon as possible to avoid water damage to your home.

Luckily, it’s fairly easy for a professional to fix most leaky faucets, and it’s also something that most homeowners can do themselves if they know how. To begin with, you’ll want to shut off the water supply to the leaking faucet. Look for the fixture shut-off valves under the sink and turn them clockwise to close them.

Once the water is turned off, you can start working on repairing the leaky faucet. Depending on what kind of faucet you have, this may involve removing the handle, prying off the decorative cap and unscrewing the screw with an Allen wrench or screwdriver, or removing the retaining nut with a wrench or spanner tool (included in most repair kits). Once the handle is removed, you can inspect the internal components and replace any that are worn out. In most cases this will include the washer, O-ring, or other small parts.

You’ll also need to replace the valve seat if you have a cartridge or disk faucet. This will require you to remove the stem from the packing nut, which can be done with a wrench or pliers. Once the stem is out, you can unscrew the adjusting ring and tighten it by turning it clockwise with the spanner tool. You’ll then need to replace the rubber seats and springs if they are damaged or worn out. Once you’ve replaced the parts, you can reassemble the faucet, re-attach the handle, and turn on the water to test it for any remaining leaks.

If the leaking is coming from around the base of the handle, it may be as simple as replacing the adjusting ring. If the leak is from the end of the spout, you’ll need to replace the seats and springs. Once again, this is an easy job for a plumber to do, but it’s something most homeowners can do themselves if they have the right tools and know how.

Faucet Replacement

While minor problems like a leaky faucet handle or dripping spout may be repairable with the right tools and time, sometimes it’s best to replace the old fixture entirely. New fixtures can improve your home’s aesthetic, lower water bills and even protect the pipes and sink from further damage. Whether you’re replacing your bathroom, kitchen or outdoor faucet, a plumber can help with the process.

Before you begin, be sure to measure your sink’s hole configuration and choose a faucet that fits correctly. You’ll also want to decide between a single-hole or three-or four-hole installation. It’s a good idea to shut off the water valves under your sink before beginning work (unless you have a lever type that requires only a turn of the handle). You’ll also want to drain the old fixture by turning on the spout and removing the pop-up drain and p-trap with pliers.

Then, gather your materials. Although you don’t need special plumber’s tools to install a new faucet, it’s a good idea to have a bucket and plastic drop sheet handy to catch any residue water that might spill. It’s also helpful to have the manufacturer’s instructions and a basin wrench to remove the bottom nut on the existing faucet that is affixed to the sink.

Once you’ve removed the old faucet, screw the new one into place and tighten it with a basin wrench or pliers. Be careful not to apply too much force, as this can crack the sink or countertop. It’s also a good idea to add a layer of silicone caulk around the gasket.

Afterwards, connect the new supply lines to the faucet. Begin by turning the water supply threads by hand as far as possible, then switch to using a basin wrench or pliers. Once the connections are secure, turn on the water and check for leaks in the areas you’ve worked.

Replacing a faucet isn’t the hardest thing to do, but it does require some skill and technical knowledge. If you’re not comfortable working with your plumbing or would rather not take the risk of damaging your home’s sink and pipes, a professional plumber can usually do it in a few hours.

Faucet Maintenance

Faucets are an important part of home upkeep and need regular care to function properly. Many homeowners fail to do this and find themselves paying for expensive faucet repairs or replacements. A plumber can help with maintenance tasks such as aerators and faucet handles. This ensures that your faucets last longer and reduces the likelihood of leaks, clogs and other problems.

Aerators, those little round devices on the end of a faucet that mix air and water to provide a smooth flow, often accumulate mineral deposits over time. These can cause aerators to become clogged which leads to uneven and low water flow. Clean aerators by removing them and soaking in vinegar or using an old toothbrush to remove any deposits. Do this 2-3 times a year to keep your water flowing smoothly.

On a daily basis, wipe down the exterior of faucets with a soft cloth or sponge and mild soap (not detergent). This prevents hard water spots and eliminates corrosion. Avoid abrasive sponges or cleaners that scratch the finish of your faucets as this can damage it. If you are unsure what to use, consult your plumber or contact the manufacturer for specific cleaning instructions for your faucet model.

If your faucets are old and showing signs of wear, it’s a good idea to replace the washers. This will not only make them easier to turn but also prevent leaks.

A plumbing contractor can help with all of these faucet repair and maintenance tasks. In addition to replacing worn parts, a plumber can help with a variety of other common fixture plumbing issues such as leaky showerheads, dripping faucets and water stains.

It’s also important to shut off the water supply valves for each faucet when not in use and drain them annually. This helps to protect them from freezing and can save you hundreds or thousands in damage. Also, in colder climates, it’s a good idea to insulate exposed pipes to help prevent them from freezing.